This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and […]

The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. Tapered roller bearings 32014 Specifications Principle dimensions(d): 70mm […]

The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.The larger the half angles of these cones the larger the axial force that the bearing can sustain. Tapered roller bearings 32013 Specifications Principle dimensions(d): 65mm Principle dimensions(D): 100mm Principle dimensions(B): […]

Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone […]

yuanchuang Tapered roller bearings 32011 Specifications Principle dimensions(d): 55mm Principle dimensions(D): 90mm Principle dimensions(B): 23mm Basic load ratings(dyn.): 80.9KN Basic load ratings(stat.): 116KN Reference speed: 5300r/min Limiting speed: 7000r/min Weight: 0.55kg Our factory is a professional bearing manufacturer and dealer in china.We have been engaged in bearing industry for 10 years and made international trade […]

When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing […]

32010 Bearing Manufacturer China: 1. Have low torque capacity at startup and running speeds 2. Can operate with low noise 3. Require little maintenance 4. Competitive price Tapered roller bearings 32010 Specifications Principle dimensions(d): 50mm Principle dimensions(D): 80mm Principle dimensions(B): 20mm Basic load ratings(dyn.): 60.5KN Basic load ratings(stat.): 88KN Reference speed: 6000r/min Limiting speed: 8000r/min […]

32009 Bearing Manufacturer China: 1. Excellent for high speeds 2. Good radial load capacity 3. Acceptable axial load capacity in both directions 4. Have low torque capacity at startup and running speeds Tapered roller bearings 32009 Specifications Principle dimensions(d): 45mm Principle dimensions(D): 75mm Principle dimensions(B): 20mm Basic load ratings(dyn.): 58.3KN Basic load ratings(stat.): 80KN Reference […]

1. The single row tapered roller bearings are used commonly; 2. The single row tapered roller bearings are divided into single row tapered roller bearing, double row tapered roller bearing and four-row tapered roller bearing; 3. The tapered roller bearing is used in automobile, rolling mill, mining, metallurgical industry,plastic machinery , etc. Tapered roller bearings […]

32007 Bearing Manufacturer China: 1) Low vibration 2) Long service life 3) Smooth operation 4)Manufactured with special cold processing technology and special heat treatment 5)Meets the performance requirements of the modern auto bearing 6)Durable and wear resisting bearings Tapered roller bearings 32007 Specifications Principle dimensions(d): 35mm Principle dimensions(D): 62mm Principle dimensions(B): 18mm Basic load ratings(dyn.): […]